Table of Contents
Advertisement
No.
Component
6
Machine front door
7
Tray 1, 2, 3, 4
8
Bottom left door
9
Locking casters
10
Tray 6 (optional)
11
Tray 6 top cover
12
Tray 5 (Bypass)
13
Tray 5 (Bypass) top cover
14
Secondary Ethernet
connector (optional)
15
10BASE-T/100BASE-TX
connector
16
USB 2.0 interface
connector
17
Control panel (Large Size UI
Kit)
Open this door to clear paper jams or replace consumables.
Load paper here.
Open this door to clear paper jams.
If Tray 6 (HCF2 (2000 sheets)) is installed in the machine, move Tray 6
(HCF2 (2000 sheets)) to the left first.
Casters which prevents the machine from moving. Lock these casters after
moving the machine to its installation site.
Load paper here.
Move Tray 6 (HCF2 (2000 sheets)) to the left and then open this top cover
to clear paper jams.
Used for loading non-standard paper (thick-stock paper, and other special
media) that cannot be loaded in Trays 1 to 4, and 6.
Open the top cover to clear paper jams.
Connected to a network cable. Can be used as Gigabit Ethernet connector.
Connected to a network cable. To use this as a Gigabit Ethernet interface
connector, install the Gigabit Ethernet (optional).
Connected to a USB cable.
Consists of operation buttons, LED indicators, and a touch screen.
For more information, refer to "Large Size UI Kit" (P.87).
Machine Components
Function
2
69
Advertisement
Table of Contents
