Table of Contents
Advertisement
2 Product Overview
Switch the power off at the end of the day or when not using the machine for an extended
period of time.
Use also the Power Saver feature to save power consumption while the machine is not in use.
For information on the Power Saver feature, refer to "Power Saver Mode" (P.82).
Important • If the power is switched off, all the services of the machine will stop. When using the machine
1
Press the power switch to switch the power on.
2
Note
Switching the Power Off
Important • If the power is switched off, all the services of the machine will stop. When using the machine
Note
1
Before switching the power off, make sure that the machine has completed all copy or print
jobs. Then, make sure that the <Data> indicator is not blinking.
Important • Do not switch the power off in the following situations. If the power is switched off, the processing
2
Press the power switch.
Important • Power off processing is performed internally
78
throughout the day for jobs such as receiving fax, do not switch the power off.
• The "Please wait..." message indicates that
the machine is warming up. The machine is
not available during warming up.
• If the machine is not powered on, check the
following:
- The power cord is plugged in.
- The main power is switched on.
- The ground fault interrupter is in the
depressed position.
throughout the day for jobs such as receiving fax, do not switch the power off.
• You can set the machine to be switched off automatically at the same time every day. For more
information, refer to "5 Tools" > "Common Service Settings" > "Power Saver Settings" >"Scheduled
Power Off" in the Administrator Guide.
data may be erased.
- While data is being received
- While a job is being printed
- While a job is being copied
- While a job is being scanned
• When switching the power off, wait 5 seconds after outputs have been delivered.
on the machine for a while after the power is
switched off. Therefore, do not switch the
main power off immediately after switching
the power off.
Ground fault
interrupter
<TEST> button
Advertisement
Table of Contents
