Batch Print; Sided Printing - Fuji Xerox apeosport-v c7785 User Manual

6 Send from Folder
 Print Quantity
Specify the number of print sets.
 Print
Prints the selected file.

Batch Print

Allows you to set batch printing.
You can print multiple files as one file. Up to 100 files can be bound in the selected order.
Note
 Paper Supply
Allows you to select paper.
 2 Sided Printing
Allows you to set 2-sided printing.
 Output
6
Allows you to set stapling and punching, and a tray where the output is delivered.
The number of sheets that can be stapled is 2 - 50 sheets (when 90 gsm paper is used).
Note
For examples of the settings of stapling and hole punching, refer to "When stapling/punching holes" (P.390).
For the paper type and the number of sheets that can be stapled, refer to "16 Appendix" > "The Paper Type and the Number
of Sheets That Can Be Stapled" in the Administrator Guide.
 File Details
Displays the [File Details] screen. Select a file from the list to check its preview image.
For information on how to preview a file, refer to "Checking File Details" (P.385).
 Print Quantity
Specify the number of print sets.
 Print
Prints the selected file.
When stapling/punching holes
The following table shows the stapling/punching positions for print files stored in a folder by
specifying [Store in Remote Folder] on a print driver, and for scan files. The following uses
the example of [1 Staple] for stapling and [2 Holes] for punching.
390
• For 2-sided printing, the last page becomes blank when the total number of printed pages is odd. For
printing of multiple files, a blank page is inserted after the final page of each file.
• If a different size document is included in multiple files, it may be printed in improper orientation.
• [Batch Print] is not available while interrupting another job.
• [Batch Print] is not available for files received by fax or Internet Fax, or files for Secure Polling. When
the selected files contain fax or Internet Fax files, the machine will not print the fax or Internet Fax
files but only the scan and print files.
• If the C3 Finisher Staple Unit 65 Sheets (optional) is installed, the maximum number of sheets that
can be stapled is 65 (when 90 gsm paper is used and thickness of bundled paper is 5.7mm or less).