Add New Address (Registering A Destination Pc On The Address Book) - Fuji Xerox apeosport-v c7785 User Manual

5 Scan
 [
Allows you to confirm information, such as [Name] and [Server Name/IP Address], on the
screen displayed.
3
Select [Add].
Important • You can only use destinations configured for SMB or FTP.

Add New Address (Registering a Destination PC on the Address Book)

You can register destination PC on the Address Book. The current Destination PC specified
on the First Tab screen can also be registered.
Note
1
Select [Add New Address].
5
2
Select a method to register a recipient.
 New
Enter a new recipient using the keyboard.
 Add from current location
Register the current location specified on the First Tab screen.
Note
When [New] is selected
3
Select a transfer protocol.
For more information on Transfer Protocol, refer to "Transfer
Protocol (Selecting a Transfer Protocol)" (P.335).
For more information on [Browse], refer to "Browse (Specifying a
Destination PC by Browsing Your Network)" (P.341).
4
Select and set an item.
 When [FTP] is selected
The following items appear:
338
] button
• [Add New Address] is not displayed depending on the settings in the System Administration mode or
depending on the number of registered recipients. Ask your system administrator to confirm the
settings and the number of recipients.
• When you select this item, the location information will be displayed. This item cannot be selected if
no location is specified on the First Tab screen.