Table of Contents
Advertisement
2 Product Overview
No.
Component
20
<Custom Button 3> (Review)
21
USB memory slot
22
One touch panels
2
(Only available for machines
with the Fax service)
23
One touch buttons
(Only available for machines
with the Fax service)
24
Embedded IC Card Reader
(optional)
25
Paper clip tray
86
"Review" is assigned to this button by default.
On the [Review] screen, you can check a list of the status of Copy, Fax, and
Scan services whose settings have been changed from the defaults. You can
also check the details of fax and e-mail recipients.
For information on how to assign a service to the button, refer to "1 Before Using the
Machine" > "Customizing the Control Panel" > "Assigning Services to the Custom Buttons" in
the Administrator Guide.
Insert a USB 2.0 memory device into this slot directly.
Note
• This feature is not available for some models. An optional component is
required. For more information, contact our Customer Support Center.
Important • A memory card reader or a USB cable cannot be connected. Insert a
memory card reader or a USB cable into the USB Hub (optional). When a
USB memory is connected to this slot, a memory card reader cannot be
connected simultaneously.
Contains one touch buttons.
Allows you to call a fax recipient or a fax job.
Allows you to specify a recipient by simply pressing one button. You can use
the buttons for fax and Internet fax jobs.
Turn over the panels to display buttons 1 - 70, M01, and M02.
There are two ways in which address numbers and stored programs are
assigned to the one touch buttons. Select either of the following:
[Type 1]
The buttons 1 to 70 are used for address numbers and they correspond to
the registered address numbers 0001 to 0070, while the buttons M01 and
M02 are used for stored programs and they correspond to the registered
stored programs 1 and 2.
[Type 2]
The buttons 1 to 60 are used for address numbers and they correspond to
the registered address numbers 0001 to 0060, while the buttons 61 to 70,
M01, and M02 are used for stored programs and they correspond to the
registered stored programs 1 to 12.
Note
• By default, [Type 1] is selected.
• This feature is not available for some models. An optional component is
required. For more information, contact our Customer Support Center.
For information on how to change the settings registered to the one touch buttons, refer to "5
Tools" > "Common Service Settings" > "Screen/Button Settings" in the Administrator Guide.
Used to authenticate a user using a smart card.
When you touch the smart card to the IC Card Reader, the machine reads
the user information registered on the smart card and authenticates the
user.
Note
• An optional component is required to use this feature. For more
information, contact our Customer Support Center.
• When the machine is in the Power Saver mode, touching the smart card
to the IC Card Reader deactivates the Power Saver mode. However, this
operation does not deactivate the Sleep mode. For more information,
refer to "Exiting the Power Saver Mode" (P.83).
Used for placing paper clips and staples.
Function
Advertisement
Table of Contents
