Table of Contents
Advertisement
2 Product Overview
Finisher D2-P with Booklet Maker (optional)
2
No.
Component
1
Tray T1 (Inserter)
2
De-curl button
3
Output tray
4
Finisher tray
5
Ground fault interrupter
6
Booklet output tray
7
Booklet output tray button
8
Right cover
9
Staple cartridges for booklet
10
Staple scrap container
11
Staple cartridge
12
Punch scrap container
13
Folder Output Tray (Only
available when the D2 Folder
Unit is installed.)
74
15
14
13
12 11
10
Load paper for covers or separators. Paper loaded here is not used for
copying or printing.
Press this button to decurl copies.
Receives copies when you select [Hole Punch], [Z Fold Half Sheet], [Auto],
[Collated], or [Uncollated].
Receives stapled, punched and Z-folded copies.
Automatically turns the machine off when a current leakage is detected.
Receives copies when you select [Single Fold (Image Inside Fold)] or [Fold &
Staple].
Press this button to deliver booklets to retrieval position.
Open this cover to clear paper jams, replace a staple cartridge, or remove
jammed staples or punch scraps.
Two staple cartridges for booklet. Remove these cartridges when replacing
them with new ones, or when clearing staple jams.
Receives scraps from the stapler. Take this container out when replacing it
with a new one.
Contains staples. Take this cartridge out when replacing the cartridge with a
new one, or when clearing staple jams.
Holds punch scraps. Take this container out when removing scraps.
Receives copies when you select [Z Fold] or [C Fold].
1
2
3
6
7
9
8
Function
4
5
Advertisement
Table of Contents
