Fuji Xerox apeosport-v c7785 User Manual page 173

 Hole Punch
Sets the position for punching.
For the hole punching position, refer to "Paper Size and Punching Position" (P.175).
Important • Ensure that the actual orientation of the original document matches the [Original Orientation]
 Original Orientation
Allows you to specify the orientation of the document so that the machine can identify the
top of the document.
Note
 Upright Images
Select this option when placing the top edge of the document against the top side of the
document glass or document feeder.
 Sideways Images
Select this option when placing the top edge of the document against the left side of the
document glass or document feeder. Always select [Sideways Images] when the top of
the document is placed facing the left side (horizontal text).
 Z Fold Half Sheet
When the Folder Unit CD1 (optional) is installed, the machine folds the output copies in Z
fold. Z fold can be applied to A3, 11 x 17". If you have mixed size documents, the width
(vertical direction) of the paper must be the same, such as a combination of A4 (portrait)
and A3 (landscape). When you have the combinations, the Z fold is only applied to the larger
papers (A3 (landscape) and B4 (landscape)).
 Output Destination/Offset
Displayed when a finisher (optional) is installed.
Select to display the [Output Destination / Offset] screen.
For more information, refer to "[Output Destination/Offset Stacking] screen" (P.173).
 Offset Stacking
Displayed when an Offset Catch Tray (optional) is installed.
Select to display the [Offset Stacking] screen.
For more information, refer to "[Offset Stacking] screen" (P.174).
[Output Destination/Offset Stacking] screen
Allows you to select the output destination and offset options.
 Offset Stacking
[Offset Stacking] screen will appear.
For more information, refer to "[Offset Stacking] screen" (P.174).
 Real Time Sample Job
This option is displayed if you select [Stacker - Stacker Cart] for the output destination, and
you can output samples of specified portions. You can specify up to three portions for each
- When [Original Orientation] is set to [Upright Images], and [Staple] is set to one position at the
right side.
- When [Original Orientation] is set to [Sideways Images], and [Staple] is set to one position at the
left side.
setting on the [Layout Adjustment] screen.
• If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
Output Format
3
173