4 Fax
For more information, refer to the documentation provided with the Server Fax Kit.
Specifying a Destination Using the Redial Feature
You can specify recipients using the Redial feature.
Important • When transmission to a certain recipient is prohibited in the System Administration mode, [Redial
1
Select [Redial List].
2
Select items you want to specify for a recipient,
4
and select [Close].
Specifying a Line (Port)
When the Additional G3 Port Kit 2 (optional) is installed, you can specify the line (port) and
send faxes. Local terminal information can be registered to each line. You can use each line
for a different purpose.
You can specify a line (port) using the keyboard screen or [Line Selection].
Important • When transmission to a certain recipient is prohibited in the System Administration mode, [
For information on how to set [Local Terminal Information], refer to "5 Tools" > "Fax Service Settings" > "Local Terminal
Information" in the Administrator Guide.
Specifying a line (port) using the keyboard screen
1
Select [
234
• Even though a line is specified in the above keyboard screen, when the lines are specified by
selecting [Line Selection] in the [Fax / Internet Fax] screen, a fax job will be transmitted in the setting
of [Line Selection]. For more information, refer to "Specifying a line (port) using [Line Selection]"
(P.235).
List] cannot be used.
cannot be used.
].
]