Table of Contents
Advertisement
1
Select [On].
2
Select any option.
Off
No text is printed.
On
Text is printed. Select the text to be used for watermark. You can specify text from three
preset options, or text registered in the System Administration mode.
For information on how to register text, refer to "5 Tools" > "Common Service Settings" > "Watermark" > "Custom Watermark
1 to 3" in the Administrator Guide.
[Watermark Effect] Screen
If you enable the Watermark Effect feature, the text strings specified in [Control Number],
[Stored Watermarks], [User Account Number], [Date & Time], and [Serial Number] on the
[Watermark] screen are embedded in the background of each copy. When you copy a
document that has been copied with Watermark Effect, the text embedded in the
background is printed as embossed or outline text depending on the option you select on
the [Watermark Effect] screen.
Note
1
Select any option.
Off
Prints the text specified in [Stored Watermarks] as it is.
Embossed
When you copy a document that has been copied with Watermark Effect, the text
embedded in the background of the copy is printed as embossed text.
Outline
When you copy a document that has been copied with Watermark Effect, the text
embedded in the background of the copy is printed as outline text.
You can specify the size, density, and other settings for the text to be printed with Watermark in the System Administration
mode. For more information, refer to "5 Tools" > "Common Service Settings" > "Watermark" in the Administrator Guide.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
Output Format
3
163
Advertisement
Table of Contents
