Fuji Xerox apeosport-v c7785 User Manual page 174

Hide thumbs Also See for apeosport-v c7785:

Table of Contents

of the sets you want to confirm during sorting and the pages you want to confirm during

stacking. Samples are output to the output tray at the top of stacker trays.

[Offset Stacking] screen

Allows you to select offset options.

The offset is a function for slightly offsetting and outputting each paper stack to allow you

to distinguish the separations. You can specify by set, job, specified number of pages, or

specified number of copies for a paper stack.

Paper Size and Stapling Position

C3 Finisher (optional)/C3 Finisher with Booklet Maker (optional)

8.5 x 11", 16K

A4, 8 x 10",

11 x 17", 8K

* : The staple orientation displayed on the touch screen differs from the actual staple orientation. Outputs are stapled in the

Finisher D2-P with Booklet Maker (optional)

B5 , 8 x 10" ,

• When the offset option is set to [System Default], output is done to the destination set on the

machine. To change the machine setting, refer to "5 Tools">"Copy Service Settings"> "Copy

Defaults">"Output Destination" in the Administrator Guide.

orientation shown in the above table.