Table of Contents
Advertisement
2 Product Overview
Inside and right views of the machine
10
2
No.
Component
1
Output tray
2
Ground fault interrupter
3
Bottom right door
4
Main power switch
5
Waste toner container door
6
Waste toner container
7
Fusing unit
8
Handle
9
Transfer unit
10
Drum cartridges
11
Toner cartridges
70
11
9
8
7
6
Outputs are delivered here.
Two types of trays are available: a normal output tray and an optional
offset stacking tray (Offset Catch Tray).
When the optional offset stacking tray is attached and A4 or smaller size
paper is to be output, do not use the extension flap.
Automatically turns the machine off when a current leakage is detected.
Open this door to clear paper jams.
When the C3 Finisher or the C3 Finisher with Booklet Maker is attached,
open the Transport Unit V1 front door first, and then open this bottom right
door.
Switches the main power of the machine on and off. Always follow the
instructions by the system administrator.
Important • Always switch the power off before switching the main power off.
For more information, refer to "Power Source" (P.77).
Open this door to replace the waste toner container.
Used to collect waste toner.
Fuses toner on paper.
Important • Do not touch this unit as it is extremely hot.
Used to pull out the transfer unit.
Transfers toner images on the drum to paper. Open this unit to clear paper
jams.
Contain photoconductors. R1, R2, R3, and R4 are installed from the left.
Contain toner (image forming power). Black (K1 and K2), Cyan (C), Magenta
(M), and Yellow (Y) toner are installed from the left.
4
5
Function
1
2
3
Advertisement
Table of Contents
