Specifying A Destination Using The Keyboard Screen - Fuji Xerox apeosport-v c7785 User Manual

1
Press a one touch button. Confirm that the
recipient (fax number) specified with the one
touch button is displayed on the touch screen.
Important • The one touch buttons have a sensor to detect which page of one touch buttons (1 - 24, 25 - 48, or
Note

Specifying a Destination Using the Keyboard Screen

You can specify recipients using the keyboard screen.
Important • When transmission to a certain recipient is prohibited in the System Administration mode, [
1
Select [
2
Specify a recipient with up to 128 characters using the keyboard displayed on the touch
screen.
Note
49 - M02) is currently opened. Before pressing a one touch button, turn over the one touch panel
completely, and take off your hand from the panel. Do not press the button while you are turning
over the panel.
• Do not place any objects near the one touch buttons, nor spill any liquid over them.
• To specify multiple recipients, press the one touch buttons continuously.
• Turn the one touch panel over to press the one touch buttons 25 and above.
cannot be used.
].
• When the Server Fax service is used, a destination must be less than 50 characters long. The
available characters are as follows:
0 to 9 Numeric characters
- Pause
# A starting character for a group number
\ A delimiter for private data. Using this character before and after private data
hides the destination string.
S A character for password verification
: DTMF signal
= A character to wait for dial tones
+ Available, but ignored
(Space) Available, but ignored
Fax/Internet Fax
One touch buttons
4
]
233