Troubleshooting - Yamaha 2016 Grizzly yfm700gplg Service Manual

EBS30274

TROUBLESHOOTING

• Any of the following fail to light: warning light, brake light or an indicator light.
• The fuel meter fails to come on.
• The speedometer fails to operate.
• The horn fails to sound. (except for CDN)
TIP
• Before troubleshooting, remove the following part(s):
1. Seat
2. Battery cover
3. Top cover
4. Side panels (left and right)
5. V-belt cooling exhaust duct
6. Rear fender
1. Check the fuses.
(Main, ignition and signaling sys-
tem)
Refer to "CHECKING THE FUS-
ES" on page 9-84.
OK ↓
2. Check the battery.
Refer to "CHECKING AND
CHARGING THE BATTERY" on
page 9-85.
OK ↓
3. Check the main switch.
Refer to "CHECKING THE
SWITCHES" on page 9-81.
OK ↓
4. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 9-19.
OK ↓
Check the condition of each of the sig-
naling system circuits. Refer to
"Checking the signaling system".
Checking the signaling system
The tail/brake light fails to come on.
1. Check the front brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 9-81.
OK ↓
NG →
Replace the fuse(s).
NG →
• Clean the battery terminals.
• Recharge or replace the battery.
NG →
Replace the main switch.
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the front brake light switch.
9-21
SIGNALING SYSTEM