Installing The Fuel Tank - Yamaha 2016 Grizzly yfm700gplg Service Manual

TIP
• Do not damage the installation surfaces of the
fuel tank when installing the fuel pump.
• Always use a new fuel pump gasket.
• Install the fuel pump in the direction shown in
the illustration.
• Install the fuel pump bracket by aligning the
projections "a" on the fuel pump with the pro-
jections on the fuel tank.
• Tighten the fuel pump nuts in the proper tight-
ening sequence as shown.
EBS30226

INSTALLING THE FUEL TANK

1. Install:
• Damper "1"
TIP
• Fit the projections "a" on the damper into the
1st and 2nd holes on the right side of the
frame.
• Make sure that the shorter end of the damper
is facing outward as shown in the illustration.
2. Install:
• Fuel hose
• Fuel hose connector holder "1"
• Fuel pump coupler
1
a a
7-3
ECB02010
NOTICE
When installing the fuel hose, make sure that
it is securely connected, and that the fuel
hose holder is in the correct position, other-
wise the fuel hose will not be properly in-
stalled.
TIP
• Install the fuel hose connector holder "1" se-
curely onto the fuel pump until a distinct "click"
is heard, and then make sure that it does not
come loose.
• To install the fuel hose onto the throttle body,
slide the fuel hose connector cover "2" on the
end of the hose in direction of the arrow shown.
FUEL TANK