Installing The Drive Select Lever Unit - Yamaha 2016 Grizzly yfm700gplg Service Manual

EBS30553
INSTALLING THE DRIVE SELECT LEVER
UNIT
1. Install:
• Shift arm "1"
• Drive select lever unit "2"
• Drive select lever shift rod "3"
Shift arm bolt
14 Nm (1.4 m·kgf, 10 ft·lbf)
LOCTITE®
Drive select lever unit bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Drive select lever shift rod lock-
nut (select lever unit side)
8 Nm (0.8 m·kgf, 5.8 ft·lbf)
Drive select lever shift rod lock-
nut (shift arm side)
8 Nm (0.8 m·kgf, 5.8 ft·lbf)
TIP
• Make sure that the drive select lever and trans-
mission are in "N" (neutral).
• The installed length "a" of the shift rod is 410
mm (16.1 in).
N
2
a
3
N
1
ENGINE REMOVAL (2)
5-7