Removing The Bearing Retainer (Except For Eps Models); Checking The Steering Stem; Installing The Steering Stem (Except For Eps Models) - Yamaha 2016 Grizzly yfm700gplg Service Manual

EBS30396
REMOVING THE BEARING RETAINER
(except for EPS models)
1. Remove:
• Bearing retainer "1"
TIP
Remove the bearing retainer with the damper
rod holder "2".
Damper rod holder (30 mm)
90890-01327
Damper rod holder (30 mm)
YM-01327
EBS30397

CHECKING THE STEERING STEM

1. Check:
• Steering stem
Bends → Replace.
EWB03780
WARNING
Do not attempt to straighten a bent stem; this
may dangerously weaken the stem.
2. Check:
• Steering stem bushings
Wear/damage → Replace.
2
1
4-57
STEERING STEM
EBS30109
INSTALLING THE STEERING STEM (except
for EPS models)
11 New
9
8
10
12
New 3
2
5
1
4
(4)
3
1. Install:
• Bearing "1"
• Bearing retainer "2"
• Oil seals "3"
New
Bearing retainer (steering stem)
40 Nm (4.0 m·kgf, 29 ft·lbf)
TIP
Install the bearing retainer with the damper rod
holder.
Damper rod holder (30 mm)
90890-01327
Damper rod holder (30 mm)
YM-01327
2. Install:
• Steering stem support "4"
• Steering stem support bolts "5"
(temporarily tighten)
3. Install:
• Steering stem "6"
4. Install:
• Collars "7"
• Steering stem bushings "8"
• Steering stem bushing holders "9"
• Cable guide "10"
• Lock washer "11"
6
13
9
7 8
New
14