Assembling The Primary Sheave - Yamaha 2016 Grizzly yfm700gplg Service Manual

3. Check:
• Guide pins "2"
Damage/wear → Replace the secondary
fixed and sliding sheaves as a set.
4. Check:
• Secondary sheave spring
Damage → Replace.
5. Measure:
• Secondary sheave spring free length "a"
Out of specification → Replace the second-
ary sheave spring.
Free length
130.6 mm (5.14 in)
Limit
128.0 mm (5.04 in)
EBS30174

ASSEMBLING THE PRIMARY SHEAVE

1. Clean:
• Primary sliding sheave "1"
• Spacer "2"
• Primary sheave weights "3"
• Primary sheave cam
TIP
Remove any excess grease.
PRIMARY AND SECONDARY SHEAVES
2. Install:
• Oil seals "1"
(into the primary sliding sheave "2")
New
a
3. Lubricate:
• Spacer inner surface
• Primary sliding sheave inner surface
TIP
• Apply Yamaha Grizzly grease or Yamaha
grease F (2.5 g) to the inner surface of the
spacer.
• Apply Yamaha Grizzly grease or Yamaha
grease F (2.5 g) to the inner surface of the pri-
mary sliding sheave.
5-54
New
Installed depth "a"
0 mm (0 in)
1
Recommended lubricant
Yamaha Grizzly grease or
Yamaha grease F
a
1
2 New