Troubleshooting - Yamaha 2016 Grizzly yfm700gplg Service Manual

EBS30265

TROUBLESHOOTING

The ignition system fails to operate (no spark or intermittent spark).
TIP
• Before troubleshooting, remove the following part(s):
1. Seat
2. Battery cover
3. Top cover
4. Side panels (left and right)
5. Storage compartment
6. V-belt cooling exhaust duct
1. Check the fuses.
(Main and ignition)
Refer to "CHECKING THE FUS-
ES" on page 9-84.
OK ↓
2. Check the battery.
Refer to "CHECKING AND
CHARGING THE BATTERY" on
page 9-85.
OK ↓
3. Check the spark plug.
Refer to "CHECKING THE SPARK
PLUG" on page 3-4.
OK ↓
4. Check the spark plug cap.
Refer to "CHECKING THE SPARK
PLUG CAP" on page 9-90.
OK ↓
5. Check the ignition coil.
Refer to "CHECKING THE IGNI-
TION COIL" on page 9-91.
OK ↓
6. Check the crankshaft position sen-
sor.
Refer to "CHECKING THE CRANK-
SHAFT POSITION SENSOR" on
page 9-91.
OK ↓
7. Check the main switch.
Refer to "CHECKING THE
SWITCHES" on page 9-81.
OK ↓
NG →
Replace the fuse(s).
NG →
• Clean the battery terminals.
• Recharge or replace the battery.
NG →
Re-gap, clean, or replace the spark plug.
NG →
Replace the spark plug cap.
NG →
Replace the ignition coil.
NG →
The crankshaft position sensor is faulty.
Replace the crankshaft position sen-
sor/stator assembly.
NG →
Replace the main switch.
9-3
IGNITION SYSTEM