Starting Circuit Cut-Off System Operation - Yamaha 2016 Grizzly yfm700gplg Service Manual

EBS30267

STARTING CIRCUIT CUT-OFF SYSTEM OPERATION

If the engine stop switch is set to " " and the main switch is set to "
closed), the starter motor can only operate if at least one of the following conditions is met:
• The transmission is in neutral (the neutral switch circuit of the gear position switch is closed).
• The transmission is in park (the park switch circuit of the gear position switch is closed).
• The rear brake lever is pulled to the handlebar or the brake pedal is pushed down (the rear brake light
switch circuit is closed).
1. Battery
2. Main fuse
3. Main switch
4. Ignition fuse
5. Engine stop switch
6. Start switch
7. Signaling system fuse
8. Rear brake light switch
9. ECU (Engine Control Unit)
10. Park switch (gear position switch)
11. Neutral switch (gear position switch)
12. Starter relay
13. Starter motor
ELECTRIC STARTING SYSTEM
13
12
1
2
3
7 4
8 5
6
9
9-7
" (on) (both switch circuits are
10
11