File Transfer - Ricoh C3030 Operating Instructions Manual

System Settings

File Transfer

This section describes the user tools in the File Transfer menu under System Set-
tings.
❖ Delivery Option
Enables or disables sending stored or scanned documents to the ScanRouter
2
delivery server.
• On
• Main Delivery Server IPv4 Address
• Sub Delivery Server IPv4 Address
• Off
Specify this option when selecting whether or not to use the ScanRouter de-
livery software. If you do, you will have to preregister I/O devices in the
ScanRouter delivery software.
❖ Capture Server IP Address
Specify the capture server IPv4 address.
This setting appears when the media link board is installed, and that the cap-
ture function is being used by the ScanRouter delivery software.
❖ Fax RX File Transmission
Specify how to deliver fax files received via the different lines.
• Setting per Line
• Line 1
• Line 2
• Line 3
• E-mail
• IP-Fax
The lines appear according to the operating environment.
• RX File Delivery
Specifies whether or not received fax documents are sent to the ScanRouter
delivery software for each fax line.
• Deliver to Server
• Do not Deliver
• Print at Delivery
Specify whether or not received fax documents sent to the ScanRouter de-
livery software should also be printed at the same time.
• Print
• Do not Print
68