Ricoh C3030 Operating Instructions Manual page 169

❖ Copy Orientation in Duplex Mode
You can set the copy orientation when making two-sided copies.
• Top to Top
• Top to Bottom
❖ Max. Copy Quantity
The maximum copy quantity can be set between 1 and 999.
The default setting is 999 sheets.
❖ Auto Tray Switching
If you load paper of the same size in two or more trays, the machine automat-
ically shifts to the other when the first tray runs out of paper (when Auto Pa-
per Select is selected.) This function is called "Auto Tray Switching". This
setting specifies whether to use Auto Tray Switching or not.
• With Image Rotation
Use to copy when using the Auto Tray Switching function.
• Without Image Rotation
Only copies with Auto Tray Switching if you load paper of the same size
and in the same orientation in two or more trays. If the paper is not the
same size or in the same orientation, copying is interrupted and the mes-
sage "Load paper." is displayed.
• Off
When a paper tray runs out of paper, copying is interrupted and the mes-
sage "Load paper." is displayed.
❖ Tone: Original Remains
The beeper (key tone) sounds if you forget to remove originals after copying.
• On
• Off
If Panel Tone of User Tools (System Settings) is [Off] the beeper does not
sound irrespective of the Tone: Original remains setting.
❖ Job End Call
You can choose whether or not the beeper sounds when copying is complete.
If Panel Tone of User Tools (System Settings) settings is [On], the machine
beeps to notify you that it did not complete a job for reasons such as copying
was interrupted, the paper tray ran out of paper, or a paper jam occurred.
• On
• Off
General Features
3
91