Turning Off The Main Power - Ricoh C3030 Operating Instructions Manual

Turning Off the Main Power

Turn off the main power as follows:
Important
❒ Do not turn off the main power switch when the On indicator is lit or blink-
ing. Doing so may result in damage to the hard disk or memory.
❒ Make sure to turn off the main power switch before pulling out the power
plug. Not doing this may result in damage to the hard disk or memory.
A
Make sure the On indicator is not lit.
B
Open the switch cover, and then turn off the main power switch.
The main power indicator goes out.
Note
❒ When the main power switch is turned off while using the fax function,
waiting fax and print jobs may be canceled, and incoming fax documents
not received. If you have to turn off this switch for some reason, keep the
following points in mind:
❒ Make sure 100% is shown as available memory on the screen before turn-
ing off the main power switch or unplugging the power cord. Fax files in
memory are deleted an hour after you turn off the main power switch or
unplug the power cord.
❒ The On indicator does not go out, but blinks in dial-in mode even if you
press the operation switch. When this happens, check the explanations be-
low, and turn off the main power switch.
• the computer is not controlling the machine.
• the machine is not receiving a fax.
Turning On the Power
29
1