Passenger Air Bag Short To Battery - Ford 2002 Bantam Workshop Manual

501-20B-28
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
J3: CHECK THE PASSENGER A R BAG CIRCUIT FOR A SHORT TO GROUND
1.
PINPOINT TEST K: DTC:B1925: PASSENGER AIR BAG SHORT TO BATTERY
CONDITIONS
K1: CHECK THE PASSENGER AIR BAG CIRCUIT FOR A SHORT TO BATTERY
08/2001
Occupant Restraints — Passive — Supplemental Air
I
2.
Air Bag Control
Module C334
Bag System
DETAILS/RESULTS/ACTIONS
3 Measure the resistance between:
- - the air bag control module C334 pin 5,
circuit 94S-JA11 (VT/WH) and pin 9, circuit
91-JA10 (BK/RD) harness side; and
- the air bag control module C334 pin 5, circuit
94S-JA11 (VT/WH) and ground; and
- - the air bag control module C334 pin 6,
circuit 91S-JA11 (BK/WH) and pin 9, circuit
91-JA10 (BK/RD) harness side; and
- the air bag control module C334 pin 6, circuit
91S-JA11 (BK/WH) and ground.
• Are the resistances greater than 10,000 ohms?
Yes
REPEAT the self-test; CLEAR the DTCs.
REACTIVATE the system.
Bag and Safety Belt Pretensioner
Supplemental Restraint System (SRS) in
this section.
No
INSTALL a new air bag wiring harness.
REPEAT the self-test; CLEAR the DTCs.
REACTIVATE the system.
Bag and Safety Belt Pretensioner Supple-
mental Restraint System (SRS) in this sec-
tion.
DETAILS/RESULTS/ACTIONS
1 Deactivate the supplemental restraint system.
REFER to Air Bag and Safety Belt Preten-
sioner Supplemental Restraint System (SRS)
in this section.
2 Visually check the passenger air bag harness
for damage.
501-20B-28
REFER to Air
REFER to Air
2002 Bantam