Sensor (Shpf Eject Clamp Home) Removal - Lexmark MS911 Service Manual

12
Remove the screw (A), and then remove the aligner.

Sensor (SHPF eject clamp home) removal

1
Remove the elevator bin. See
2
Remove the elevator bin bracket. See
3
Remove the lower left cover. See
4
Remove the upper left cover. See
5
Remove the front door. See
6
Remove the top inner cover. See
7
Remove the rear cover. See
8
Remove the motor (SHPF compiler eject). See
9
Remove the motor (SHPF compiler pre-eject). See
10
Remove the staple unit assembly. See
11
Remove the compiler assembly. See
"SHPF elevator bin removal" on page
"SHPF elevator bin bracket removal" on page
"Lower left cover removals" on page
"SHPF upper left cover removal" on page
"SHPF front door removal" on page
"SHPF top inner cover removal" on page
"SHPF rear cover removal" on page
"Motor (SHPF compiler eject) removal" on page
"Motor (SHPF compiler pre-eject) removal" on page
"SHPF staple unit assembly removal" on page
"SHPF compiler assembly removal" on page
Repair information
416
331.
332.
344.
348.
336.
336.
339.
367.
403.
4021, 7421
399.
400.