[X]-Page Jam, Open Doors G, H, And J And Clear Jammed Paper. Leave Paper In Bin. [4Yy.xx] - Lexmark MS911 Service Manual

Error code Description
425.95 The paper remains detected at the SHPF compiler
during a job.
426.93 The sensor (booklet maker transport) did not detect
the paper.
426.95 The paper remains detected at the sensor (booklet
maker transport) during a job.
427.93 The sensor (booklet maker tamper paper present) did
not detect the paper.
428.93 The sensor (booklet maker fold exit) did not detect
the paper.
428.95 The paper remains detected at the sensor (booklet
maker fold exit) during a job.
429.93 The SHPF ejector failed.
[x]‑page jam, open doors G, H, and J and clear jammed paper. Leave paper in bin. [4yy.xx]
1
Open door G, and then remove the jammed paper.
Note: Make sure that all paper fragments are removed.
Action
See "SHPF elevator bin movement service check"
on page
See "Booklet maker feed jam service check" on
page 79.
See "Booklet maker transport section paper jam
service check" on page
See "Booklet maker tamper paper jam service
check" on page
See "Bifold exit jam service check" on page
See "SHPF ejector failure service check" on
page 125.
Diagnostic information
64
173.
75.
96.
4021, 7421
83.