Staple Finisher Upper Exit Roller Drive Gears Removal - Lexmark MS911 Service Manual

Installation notes:
•
The upper exit roller assembly must be in the lowermost position.
•
Align the pointer on the gear with the notch on the frame.

Staple finisher upper exit roller drive gears removal

1
Remove the front cover. See
2
Remove the rear cover. See
3
Remove the top cover. See
4
Remove the controller board. See
5
Remove the controller board holder. See
6
Remove the exit motor bracket. See
"Staple finisher front cover removal" on page
"Staple finisher rear cover removal" on page
"Staple finisher top cover removal" on page
"Staple finisher controller board removal" on page
"Staple finisher controller board holder removal" on page
"Exit motor bracket removal" on page
Repair information
280
229.
230.
231.
244.
277.
4021, 7421
245.