2X500-Sheet Tray Motor Tests; 2500-Sheet Tray Motor Tests; Staple Finisher Motor Tests; Staple And Hole Punch Finisher Motor Tests - Lexmark MS911 Service Manual

2x500‑Sheet Tray Motor Tests
These tests verify that the 2 x 500‑sheet tray motors are working properly.
1
Enter the Diagnostics Menu, and then navigate to:
Motor Tests > 2x500‑Sheet Tray Motor Tests
2
Select a motor.
3
Check if the motor runs.
2500‑Sheet Tray Motor Tests
These tests verify that the 2500‑sheet tray motors are working properly.
1
Enter the Diagnostics Menu, and then navigate to:
Motor Tests > 2500‑Sheet Tray Motor Tests
2
Select a motor.
3
Check if the motor runs.
3000‑Sheet Tray Motor Tests
These tests verify that the 3000‑sheet tray motors are working properly.
1
Enter the Diagnostics Menu, and then navigate to:
Motor Tests > 3000‑Sheet Tray Motor Tests
2
Select a motor.
3
Check if the motor runs.

Staple Finisher Motor Tests

These tests verify that the staple finisher motors are working properly.
1
Enter the Diagnostics Menu, and then navigate to:
Motor Tests > Staple Finisher Motor Tests
2
Select a motor.
3
Check if the motor runs.

Staple and Hole Punch Finisher Motor Tests

These tests verify that the staple and hole punch finisher motors are working properly.
1
Enter the Diagnostics Menu, and then navigate to:
Motor Tests > Staple and Hole Punch Finisher Motor Tests
2
Select a motor.
3
Check if the motor runs.
Service menus
196
4021, 7421