Staple Finisher Bin Stack Height Assembly Sensors Removal - Lexmark MS911 Service Manual
Hide thumbs
Also See for MS911:
- Service manual (655 pages) ,
- Technical reference (102 pages) ,
- Quick reference manual (18 pages)
Table of Contents
Advertisement
3
Remove the two screws (A).
4
Swing out, and then set aside the assembly.
Staple finisher bin stack height assembly sensors removal
1
Remove the bin. See
"Staple finisher bin removal" on page
2
Remove the left inner cover. See
3
Remove the bin stack height assembly. See
"Staple finisher left inner cover removal" on page
"Staple finisher bin stack height assembly removal" on page
Repair information
234
232.
233.
4021, 7421
233.
Advertisement
Table of Contents
