Booklet Maker Aligner Assembly Removal - Lexmark MS911 Service Manual

4
Disconnect the cable (A), and then remove the sensor.

Booklet maker aligner assembly removal

1
Remove the aligner jam access cover. See
2
Remove the front cover. See
3
Remove the right cover. See
4
Slide the aligner (A) to the middle.
5
Disconnect the two cables (B).
"Booklet maker aligner jam access door removal" on page
"Booklet maker front cover removal" on page
"Booklet maker right cover removal" on page
Repair information
496
456.
457.
4021, 7421
460.