Sensor (Staple Finisher Paper Feed) Removal - Lexmark MS911 Service Manual

3
Disconnect the cable (B), and then remove the sensor.

Sensor (staple finisher paper feed) removal

1
Remove the front cover. See
2
Remove the rear cover. See
3
Remove the top cover. See
4
Remove the two screws (A), and then dislodge the bracket.
"Staple finisher front cover removal" on page
"Staple finisher rear cover removal" on page
"Staple finisher top cover removal" on page
Repair information
258
229.
230.
231.
4021, 7421