Bifold skew adjustment
Perform this procedure when:
•
Reinstalling the booklet maker aligner assembly.
•
The fold skew exceeds the tolerance of +/‑ 1 mm.
1
Send a bifold print job.
2
Unfold the paper with the ridge facing up.
3
Confirm the skew (A) by measuring the length of edges A1 and A2. If A1‑A2 exceeds +/‑ 1 mm, then proceed with
the rest of the steps.
4
Pull out the booklet maker from the finisher, and then loosen the two screws (B).
A
A1
A2
B
Repair information
227
4021, 7421