8
Remove the three screws (C), and then remove the guide.
Installation note: Position the edge of the guide over the bin.
Motor (SHPF compiler eject) removal
1
Remove the elevator bin. See
2
Remove the elevator bin bracket. See
3
Remove the HBPF lower left cover or the SHPF lower left cover. See
4
Remove the upper left cover. See
"SHPF elevator bin removal" on page
"SHPF elevator bin bracket removal" on page
"SHPF upper left cover removal" on page
Repair information
399
331.
332.
"Lower left cover removals" on page
348.
4021, 7421
344.