Muratec mfx-2200 User Manual page 365

5 Fax Settings
DB2-90290-60.indb 3
501 Default Settings
page 8-15
503 Fax Forward page 4-44
If you set this to ON, documents (faxes) received within a preset time can be forwarded to a
specified destination. You can also enter, change, or delete forwarding destinations information.
505 CoverPage Setup page 4-11
You can register up to three cover page documents.
507 F-Code Box page 4-18
You can register up to 20 F-code boxes for the F-code communication. You can
also delete the entered F-code box.
509 Security function
page 6-1
5011 Resolution
You can set the default scanning resolution.
5013 Contrast
You can set the default scanning contrast.
5015 TTI
If you set this to ON, you can display or print a
TTI in the default setting.
5017 Memory Tx
If you set this to ON, the memory transmission is
given priority in the default setting. If you set it to
OFF, the real time transmission is given priority.
5019 Cover Page
If you select any of the documents 1 to 3, you
can always transmit the cover page attached to
the transmission document.
5021 Tx Report
If you set this to ON, you can automatically print
the transmission report at every transmission.
5023 Stamp
If you set this to ON, you can always stamp
transmission documents.
5025 File Format*1
You can set the default format of a file
attached to Internet Fax.
5027 Fixed Form*1
You can set the default subject and message
attached to Internet Fax.
Closed Tx page 6-2
If you set this to ON, you can transmit faxes only
to another machine with the same passcode set.
page 6-4
Closed Rx
If you set this to ON, you can receive faxes only
from another machine with the same passcode set.
page 6-5
Passcode
You can register a passcode required for the
closed transmission and reception.
page 6-7
ID check Tx
If you set this to ON, the lower four digits of
the fax number you dialed are compared with
those registered in the other machine, and
faxes will be transmitted only when the
numbers match.
Check broadcast dest. page 6-10
If you set this to ON, the screen for confirming the entered
destination number appears before starting transmission.
Dial double-push page 6-12
If you set this to ON, the screen for re-entering the
fax number, which was entered using the numeric
keys, appears before starting transmission.
Security Rx page 6-14
10
10-3
2007/02/02 12:34:31