Unacceptable Paper; Printing Area - Muratec mfx-2200 User Manual

Unacceptable paper

Do not use the following paper. Using such paper could cause poor printing
quality, paper jams, or malfunction.
• O HP film that has already been printed once
* Even the OHP film output in blank cannot be reused.
• P aper printed on a thermal printer or an inkjet printer
• P aper that is too thick or too thin
• P aper that is creased, folded, wrinkled, or torn
• P aper that has been taken out from the package and left for a long period
• P aper that absorbs moisture
• P aper with punch holes, holes, windows, or perforated lines
• P aper of which surfaces are too smooth, too rough, or not uniform
• P aper of which surfaces are processed, such as carbon paper, thermal
• P aper subject to processing such as gilding or embossing
• P aper of different sizes mixed together
• I rregularly shaped paper (paper that is not rectangular)
• P aper that is fastened by glue, staples, paper clips, etc.
• P aper with stamps, tapes, stickers or glue labels attached
• P aper with ribbons, hooks, or buttons attached
• P aper that is curled or waved
• A rt paper, coated paper, coated paper for inkjet printers

Printing area

The area shown below cannot be printed.
Area (A) that is 3 mm ± 3 mm (when evenly magnified) from the front edge
of paper
Area (B) that is 3 mm ± 3 mm (when evenly magnified) from the back edge
of paper
Area (C) that is 3 mm ± 3 mm (when evenly magnified) from the edge of
paper
DB2-90290-60.indb 43
of time
paper, or pressure sensitive paper
Paper discharging direction
A, B, C: 3 mm ± 3 mm
Paper
1
1-43
2007/02/02 12:31:42