Closed Communication; Setting The Closed Transmission - Muratec mfx-2200 User Manual

Closed Communication

With the closed communication function, you can limit the destinations for
fax communications to Muratec machines only (excluding some models).
Furthermore, by setting a passcode, you can narrow down the machines to those
that have security functions and also the same passcode registered. For the
closed communication function, you can set transmission and reception options
separately.

Setting the closed transmission

Set the closed transmission.
IMPORTANT
For manual transmission, even if you set the closed transmission "On", it remains
invalid.
NOTE
• B efore setting the closed transmission, you need to register a protect passcode (page
8-33).
• For the passcode setting, refer to "Registering a passcode" (page 6-5).
• F or details about the closed communication and the communication range specified
by a passcode, refer to "Passcode and communication range" (page 6-6).
1
Press <Menu>, <5>, <0>, <9>, [Enter].
2
Enter the protect passcode using the numeric keys and press [Enter].
3
Select "Closed Tx" using the cursor keys and press [Enter].
4
Select "On" to set the closed transmission, "Off " not to set; then
press [Enter].
5
Press [Close] to return to the standby screen.
6-2
DB2-90290-60.indb 2
Security function
Closed Tx :Off
Closed Rx :Off
Passcode :0000
Close Enter
Closed Tx
Off
On
Cancel Enter
Default: Off
1/3
2007/02/02 12:33:32