To enter an I.D. code
You need to enter an I.D. code to print out stored documents, etc. Make a
record not to forget it.
12
Select "I.D.Code" using the cursor keys and press [Edit].
13
Enter an I.D. code (4 digits) using the numeric keys and press
[Enter].
If you enter an incorrect code, press [Clear] to delete it and then enter
the correct one.
14
To continue to register other F-code boxes, press [Close], then repeat
from step 3 of "Registering an F-code box" (page 4-18).
Press <Reset> to return to the standby screen.
4-26
DB2-90290-60.indb
26
F-Code Box Reg.
Enter I.D.Code
* _ ***
Clear
Cancel
Enter
2007/02/02
12:33:14