When A Power Failure Occurs; Memory Backups; Cannot Transmit; Cannot Receive - Muratec mfx-2200 User Manual

When a Power Failure Occurs

 When a power failure occurs
During phone call
During transmission
During reception
During copying
While printing
received faxes
While printing a list
During document
scanning
 During the power failure
Copy
Fax transmission
Fax reception
Making a phone call
Receiving a phone call If the telephone is connected to this machine, you can receive a

Memory backups

• I mage data stored in the memory will be maintained for approximately 72
hours, even if a power failure occurs or the power is turned OFF. Note that
the power should have been ON for at least 24 hours for proper function of
memory backup.
DB2-90290-60.indb 33
You can continue the conversation.
Transmission will be cut off.
In the case of memory transmission, when the power comes
back on the pages halfway transmitted will be automatically
transmitted again.
In the case of real-time transmission, they will not be
automatically transmitted again. Transmit again.
Reception will be cut off.
If the power recovers, the pages received completely before the
power failure will be printed.
Printing will stop.
Scanning will stop. Even when power is restored, scanning
will not restart. After the power is back on, press <Stop> to
discharge the documents.
Cannot copy.
Cannot transmit.
Cannot receive.
If the telephone is connected to this machine, you can make a
phone call.
phone call. You cannot put the other party on hold.
Troubleshooting
9
9-33
2007/02/02 12:34:28