Power Failure Report; In The Event Of A Power Failure; Memory Back Up - Muratec MFX-2500 Operating Instructions Manual

General reference
Hide thumbs Also See for MFX-2500:
Table of Contents

Advertisement

Just in case ...

In the event of a power failure

Power failure during the machine is working
During telephone call:
You can continue to speak with the handset.
During fax transmission:
The transmission will be cut off. When the power comes back, your machine starts
to transmit again automatically if it was the memory transmission. If it was the
feeder transmission, you should transmit again.
During fax reception:
The reception will be cut off. When the power comes back, your machine prints the
pages which were received before the power failure occurred.
During copying/printing:
The printing will stop.
During power failure
Your machine can receive telephone calls even in the event of a power failure if an
optional handset is attached. But it cannot send or receive a fax document.
2.10

Memory back up

The image data stored in memory will be kept for the following time, even when the
power failure occurs or your machine is turned off.
Note: Your machine should be charged for 48 hours continuously before.
16 MB: about 60 hours (Standard)
24 MB: about 36 hours
40 MB: about 12 hours
56 MB: about 5 hours

Power failure report

If any documents in memory were erased due to power failure, the report will be
printed when the power comes back. The report tells you what documents were
erased.

Advertisement

Table of Contents
loading

Table of Contents