When Power Failure Occurs; Main Unit Operation; Memory Backups - Muratec MFX-2830 Operation Manual

In This
Case...

Main unit operation

■ What happens when power failure occurs
During phone call
During fax transmission
During fax reception
During copying
During printing a list
■ During the power failure
Copy
Fax transmission
Fax reception
Making phone calls
Receiving phone calls
*The handset is optional.

Memory backups

Image data stored in memory is held under the following conditions even if a power failure occurs
or the unit is shut down.
· Image data stored in memory is held for the following period of time. Note that the power of the
machine should be turned ON for at least 48 hours beforehand.
· The time it takes for back up image data depends on the size of the memory.
32 MB: Approx. 34 hours (standard memory)
installed)
5-34
In This Case... Maintenance and Troubleshooting
●

When Power Failure Occurs

Phone conversation can continue.
Transmission will be cut off. When the power comes back, your machine will start to trans-
mit again automatically if it was in memory transmission. If it was a real-time transmis-
sion, it will not start again. Transmit again.
Reception will be cut off. When the power comes back, the machine will print the pages re-
ceived completely before the power failure.
Printing will stop.
Cannot copy.
Cannot transmit.
Cannot receive.
Cannot make phone calls.
Phone calls can be received with the handset.
64 MB: Approx. 17 hours (if the 32 MB Memory Extention kit is