Communication Error Messages - Muratec F-315 Field Engineering Manual

Communication Error Messages

The error messages on Check Message printouts indicate the following:
Here's a brief summary:
Error Message
Check condition of remote fax.
Repeat transmission.
Line is busy.
Check received documents.
Memory full.
Dialing number is not set.
Stopped.
Possible Meanings
• Remote machine malfunctioned
• No handshake signals from remote machine
• Wrong phone number reached
• Poor phone line conditions prevented
communication
• No handshake signals from remote machine
• Document missfeed or miscount
• Unable to reach remote machine after attempting
specified number of redial tries
• Remote machine's line was busy
• Remote machine didn't answer
• Receive confirmation signal not received from
remote machine
• Poor line conditions caused a poor image
• Remote unit's memory capacity has been exceeded
• Stored phone number failed to dial properly
• Someone pressed the <Stop> key at the remote fax
during the handshake
4-21