Before Installing The Software In Unix/Linux; About Cups; System Requirements - Toshiba E-studio2822AM Software Installation Manual

Before Installing the Software in UNIX/Linux

0.
Refer to following pages to install the software and configure the printer in UNIX/Linux:
 P.12 "About CUPS"
 P.12 "System requirements"
 P.13 "Connection Environment"
 P.30 "Configuring the Printer Using CUPS"
 About CUPS
When you configure the printer in UNIX/Linux using CUPS, you can use LPR printing or IPP printing. This guide
describes the behavior, options, and installation method of the CUPS printer driver for the equipment. The behavior
of the printer driver presented in this manual is consistent with CUPS v1.2.4. The driver may appear and/or operate
slightly differently in different versions. In the CUPS environment, you use a PostScript Printer Description (PPD) file,
not a printer driver to configure the printing. The PPD file is included in this package.
 System requirements
Development Environment
The supported UNIX/Linux environment is as follows.
OS:
Redhat Enterprise 6.x, 7.x, 8.x
Fedora Ver.35
Open SuSE Leap 15.3
Bharat Operating System 8.x
CUPS:
1.2.4
Implementation Method
This driver consists of a PPD file that works in conjunction with an interface like XPP, KPrinter, etc. It can also be used
on OSX in the same way that it is used on Linux, but this is not recommended.

12 Before Installing the Software in UNIX/Linux