Set Mode: Option Menu Operations; Setting The Optional Microphone With Camera For Use - Yaesu FT2DR Operating Instructions Manual

Set Mode: OPTION Menu Operations

Press and hold the
[OPTION] for the USB camera setting.
After completing the setup, press

Setting the Optional Microphone With Camera for Use

Image size and quality can be set for the optional microphone with camera (MH-85A11U).
1
Touch [1 USB CAMERA].
2
Rotate the DIAL to select [SIZE], then press the
3
Rotate the DIAL to select one of the following image size settings.
160*120 / 320*240
Remark The default setting: 160*120
4
Press the key.
5
Rotate the DIAL to select [QUALITY], then press the
6
Rotate the DIAL to select one of the following image quality levels.
LOW / NORMAL / HIGH
Remark The default setting: LOW
7
Rotate the DIAL to select [SP SEL], then press the
8
Rotate the DIAL to select the speaker.
CAMERA The audio is routed to MH-85A11U speaker (internal speaker is off).
INT SP The audio is routed to the internal speaker (MH-85A11U speaker is off).
Remark The default setting: CAMERA
Cautions
y If image size is set to large or image quality is set to high, the data transmission time becomes longer.
y The transmission time varies depending on the image size.
key for over one second to display "SETUP MENU", then touch
to exit from Set mode.
key.
key.
key.
157