Set" ( Menu ) Mode - Yaesu FT-2980E Operating Manual

The FT-2980R/E Set (Menu) mode, already described in parts of many previous chapters,
is easy to activate and set. It may be used for configuration of a wide variety of transceiver
parameters, some of which have not been detailed previously. Use the following procedure
to activate the Set (Menu) mode:
1. Press and hold in the [ MHz ( SET )] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select the Menu Item to be adjusted.
3. Press the [ MHz ( SET )] key momentarily to enable adjustment of the selected Menu
item, then rotate the DIAL knob to perform the actual adjustment.
4. After completing your selection and adjustment, press and hold in the [ MHz ( SET )]
key for one second to exit the Set mode and resume normal operation.
Menu Item
1 APO Enables/Disables the Automatic Power Off feature.
2 AR BEP Selects the Beep option during ARTS™ operation.
3 AR INT Selects the Polling Interval during ARTS™ operation.
4 ARS Activates/Deactivates the Automatic Repeater Shift
feature.
5 BCLO Enables/Disables the Busy Channel Lock-Out fea-
ture.
6 BEEP Enables/Disables the key beeper.
7 BELL Selects the CTCSS/DCS/EPCS Bell Ringer repeti-
tions.
8 BNK.LNK Select the Memory Bank for the Memory Bank Link
Scan.
9 BNK NM Programming an Alpha/Numeric label for a Memory
Bank.
10 CLK.SFT Shifting of the CPU clock frequency.
11 CW ID Enables/Disables the CW identifier during ARTS™
Operation.
12 CWTRNG Enables/Disables the CW Training feature and se-
lects the sending speed of the morse Code.
13 DC VLT Indicates the DC Supply Voltage.
14 DCS CD Setting of the DCS code.
15 DCS RV Enables/Disables "Inverted" DCS code decoding.
16 DIMMER Setting of the front panel display's illumination level.
17 DT A/M Enables/Disables the DTMF Autodialer feature.
18 DT DLY Setting of the DTMF Autodialer's TX Delay Time.
19 DT SET Loading of the DTMF Autodialer Memories.
FT-2980R/E Operating Manual
Function

"Set" ( Menu ) Mode

Available Values
30MIN / 1HOUR /
3HOUR / 5HOUR /
8HOUR / OFF
IN RNG / ALWAYS / OFF
25SEC / 15SEC
ON / OFF
ON / OFF
KY+SCN / KEY / OFF
1 / 3 / 5 / 8 /
CNTNUE / OFF
---
---
ON / OFF
ON / OFF
4WPM - 13WPM /
15WPM / 17WPM /
20WPM / 24WPM /
30WPM / 40WPM / OFF
(20CPM - 65CPM (5CPM
multiples) / 75CPM /
85CPM / 100CPM /
120CPM / 150CPM /
200CPM)
---
104 standard DCS codes
ENABLE / DISABL
LVL 0 (OFF) - LVL 10
MANUAL / AUTO
50 / 250 / 450 / 750 /
1000 (ms)
---
Default
OFF
IN RNG
25SEC
ON
OFF
KY+SCN
OFF
---
---
OFF
OFF
OFF
---
023
DISABL
LVL 5
MANUAL
450 (ms)
---
61