Registering To Memory Channel - Yaesu FT2DR Operating Instructions Manual

Registering to Memory Channel

Caution
The information registered to memory channels can be corrupted by incorrect operation, static
electricity, or electrical noise. Also, it can be erased in the event of a failure or repair. Be sure to keep
a record of the settings on paper or back up the data to the microSD memory card. For details on
saving a backup onto a microSD memory card, see "Set Mode: SD CARD Menu Operations" on page
154.
The transceiver allows programming 900 memory channels (memory channel numbers
1 to 900).
1
Press the key to enter VFO mode.
2
Rotate the DIAL to tune to the frequency to be
registered to a memory channel.
3
Touch [F MW] for over one second.
The transceiver will enter Memory Channel
Registration mode, and the number of the next
available memory channel will flash on the LCD.
Remarks • To cancel the memory channel registration,
press
• To specify some other memory channel to
register the frequency, select the memory
channel by rotating the DIAL.
If the specified memory channel is unregistered,
the ( icon will be shown, and the memory
channel will flash.
If the specified memory channel is previously
registered, the ) lights up.
.
A Wide Variety of Memory Functions
55