Basic Operation; Performing Communication; Turning On The Transceiver - Yaesu FT2DR Operating Instructions Manual

Performing Communication

To communicate using the transceiver in the analog communication mode, follow the
procedure below:

Turning on the Transceiver

1
Press and hold
When the transceiver is turned on for the first time
after purchase, the call sign input message appears
on the LCD. Press the
call sign input screen. When the transceiver is turned
on the second time, and subsequently, the opening
screen appears followed by the frequency screen.
32

Basic Operation

Turn on the transceiver
Adjust the Volume Level
Select an Operating Band
Select a Frequency Band
Turn in to a Frequency
Perform Communication
for over one second.
key to proceed to the