Yaesu FT2DR Operating Instructions Manual page 17

y Dual Band Screen
A-band and B-band are displayed in a top-down fashion.
y Function Menu Screen
Touching [F MW] displays the function menu screen.
y Band Scope Screen
The band scope screen can be displayed by touching [SCOPE] from the function menu
screen.
• Touching [F MW] displays the function menu screen.
• Touching [TX M] enables the communication mode to be
fixed on the transmission side.
• Touching [MODE] each time switches the operation
mode.
Reference You can change the number of band scope channels
by pressing and holding the
second to enter Set mode, then select [DISPLAY] → [3
BAND SCOPE] to select the desired number of channels
(17ch/35ch/71ch).
Names and Functions of Controls
key for over one
17