Using Set Mode
The Set Mode permits configuring the various functions according to individual
operating needs and preferences.
1. Press and hold the Function key.
The previously selected Set Mode item is dis-
played.
2. Press the [▲] key or [▼] key to select the de-
sired Set Mode item.
3. Press the function key, then press the [] key or
[] key to change the setting.
4. Press the PTT switch to save the settings and
return to normal operation.
• In step 4 above, press the Function key to save the new setting and return to
Set Mode item to set the other Set Mode.
• On some setting screens, key operation is different than described in the
above steps (For example, inputting the characters, etc.). Refer to the Advance
manual.
For additional details, refer to the Advanced Manual which may be down-
loaded from the Yaesu website
Tables of Set Mode Operations
Set Mode
No.
item
Sets the length of time until the transceiver
1
APO
turns off automatically.
Sets the beep option during ARTS opera-
2
AR BEP
tion.
Sets the polling interval during ARTS oper-
3
AR INT
ation.
Turns the busy channel lockout function
4
BCLO
ON/OFF.
Sets the beep function on pressing the
5
BEEP
keypad, or stopping the receiver scanning.
Selects the number of CTCSS/DCS/PAG-
6
BELL
ER/ARTS Bell ringer repetitions.
Turns the CW Identifier ON/OFF during
7
CWID
ARTS operation.
26
Description
Selectable options
(Options in bold are the
default settings)
OFF / 0.5 Hours – 12
Hours
OFF / INRANG / ALWAYS
25 SEC / 15 SEC
BCL.OFF / BCL.ON
KEY+SC / KEY / OFF
OFF / 1 T / 3 T / 5 T / 8 T /
CONT
TX OFF / TX ON