Using Memory Bank; Registering To Memory Banks - Yaesu FT2DR Operating Instructions Manual

Using Memory Bank

The registered memory channels can be sorted according to the intended use.
The transceiver allows using up to 24 memory banks. A maximum of 100 memory
channels can be registered in each memory bank. One memory channel may also be
registered in two or more memory banks. If the data on a memory channel is edited
or updated, the data on the corresponding memory channel in the memory banks is
automatically edited or updated.
Memory channels
1 145.000MHz
2 145.500MHz
3 120.400MHz
4 -
5 439.700MHz
6 432.800MHz
7 108.700MHz
8 -
9 -
10 -
900 -

Registering to Memory Banks

1
Press the
2
Rotate the DIAL to select the memory channel to
register in the memory bank.
3
Touch [F MW] for over one second.
Memory Write mode is activated.
4
Rotate the DIAL to select the memory bank (B1 to B24)
to register the memory channel.
5
Touch [M.WRITE].
The memory channel is registered in the selected
memory bank.
62
b1
b2
b3
b4
b5
b6
b7
b8
b9
b10 (1–100)
b24 (1–100)
key, to enter Memory mode.
Memory banks
(1–100) 144MHz band is registered.
(1–100) 430MHz band is registered.
(1–100)
(1–100) Ham radio bands are registered all together.
(1–100)
(1–100) AIR band is registered.
(1–100)
(1–100)
(1–100)