Displaying Your Location In Digital Mode; Setting The Standby Beep; Adjusting The Microphone Sensitivity Microphone Gain - Yaesu FT2DR Operating Instructions Manual

Set Mode: TX/RX Menu Operations

Displaying Your Location in Digital Mode

Set whether or not to display your location in digital mode.
1
Touch [2 DIGITAL].
2
Touch [3 LOCATION SERVICE].
3
Rotate the DIAL to select the desired setting.
ON
OFF
Remark The default setting: ON
For details on the function, refer to the GM Function Instruction Manual.

Setting the Standby Beep

Set whether or not to emit the standby beep sound when the remote station completes
transmission.
1
Touch [2 DIGITAL].
2
Touch [4 STANDBY BEEP].
3
Rotate the DIAL to select the desired setting.
ON
OFF
Remark The default setting: ON
Adjusting the Microphone Sensitivity
You can adjust the input level of the built-in microphone or an optional external microphone.
1
Touch [3 AUDIO].
2
Touch [1 MIC GAIN].
3
Rotate the DIAL to select the desired microphone sensitivity level.
Select a microphone gain level from LEVEL 1 to LEVEL 9.
Remark
The default setting: LEVEL 5
Tips
• Increasing the microphone gain excessively can distort the sound or pick up the surrounding noise,
impairing intelligibility.
• Be sure to check the microphone gain whenever the microphone is changed.
134
Displays your location.
Does not display your location.
Emits the standby beep sound.
Does not emit the standby beep sound.
Microphone Gain