Returning To The Previous Frequency; Changing The Home Channel Frequency - Yaesu FT2DR Operating Instructions Manual

A Wide Variety of Memory Functions
2
Touch [HOME].
The home channel of the currently selected frequency band appears on the LCD.
Tips • For details on the home channels displayed on the LCD, see the following table.
• After selecting the desired frequency, rotating the DIAL returns the transceiver to VFO
mode.
Frequency band
AM Band
FM Band
SW band
50 MHz
AIR band
144 MHz band

Returning to the Previous Frequency

1
Touch [F MW].
The function menu appears on the LCD.
2
Touch [HOME].
The frequency band selected before recalling the home channel appears on the LCD.

Changing the Home Channel Frequency

Change the home channel frequencies from the default setting.
1
Press the
2
Rotate the DIAL to tune in to the frequency you want to set as a home channel.
3
Touch [F MW] for over one second.
4
Touch .
5
Touch [H.WRITE].
6
"OVERWRITE?" appears.
7
Select [OK], then touch [OK] to confirm.
Overwriting completes and the home channel frequency is changed.
58
Frequency
540 kHz
76.000 (88.000) MHz
1.800 MHz
50.000 MHz
108.000 MHz
146.520 (144.000) MHz
key to enter VFO mode.
Frequency band
174 to 222 MHz band
Information radio band (1)
430 MHz band
470 to 770 MHz band
Information radio band (2)
Frequency
174.000 MHz
222.000 MHz
446.000 (430.000) MHz
47.000 MHz
860.000 MHz